Loading... Please wait...

Our Newsletter

26mm CC 3000mA LED Driver 3 Modes, 3-18V, XHP70.2 XHP70, XHP50, XHP35, 1-4pcs XM-L2

  • 26mm CC 3000mA LED Driver 3 Modes, 3-18V, XHP70.2 XHP70, XHP50, XHP35, 1-4pcs XM-L2
8.00 Grams
Calculated at checkout

Product Description

26mm CC 3000mA LED Driver 3 Modes, 3-18V

For XHP70.2 XHP70, XHP50, XHP35, 1-3pcs XM-L2 in series


Operating voltage:3-18V, up to 20V

The automatic thermostat: automatic adjustment reduces the output current when the temperature exceeds a preset threshold. Overheat protection circuit is activated to ensure that the desired power output.

Low voltage protection: 2 cell 5.5V, the single lithium protection 3V  When the low battery working flash two under 5 seconds(DIY user preferences protection threshold point)

Overheat protection,:55-60°  overheating protection automatically reduce the power to adjust the brightness Not automatically shift bit (3 LEDs in series work, different configurations need to order)

Mode:(High 100% - Mid 30% - Low 5%)

LED current :2.6-3A

Size: 26 diameter * 24MM the drive diameter-17MM thickness

Automatically buck: single lithium or double-lithium can promote 3-4XML boost,3-4 Lithium constant current constant temperature driven,Is reduced, the process is automatically switched No operator

The output power :3-4 XML, single lithium 10W output, dilithium 25-30W output LED end current 2.6-2.8A ,3-4 Lithium LED of the current 2.6-2.8A.

Other features: users can set the current subtraction completion of the sampling resistor

Protection function and the prompt signal: Use the jump to low-grade, can not shift and 5 seconds, flash for high temperature, it is recommended to reduce the brightness or increase the cooling Conditions; to flash under no electric jump to low-grade 5 seconds, the proposed charge to avoid damage to the battery. (Thermostat circuit does not function)

Connection: red line to the LED+. Black line to LED-, the battery+ on the the baffle center, The casing connection-line. Attention to insulation and cooling, otherwise you will burn the LED or circuit board. Before detection circuit board and LED is normal, do not installed on the machine.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the 26mm CC 3000mA LED Driver 3 Modes, 3-18V, XHP70.2 XHP70, XHP50, XHP35, 1-4pcs XM-L2 to your wish list.

You Recently Viewed...